Range of application:
For cutting various types of tape, especially suitable for high-precision cutting of electronic Adhesive materials. For example, double-sided tape, masking tape, cloth tape, PVC tape, PET tape, foam tape, 3M tape series, polyester film tape, Goldfinger, PE protective film, aluminum foil, copper foil, nonwovens, release paper.
Main characteristics:
Adopts PLC integrated control, variable frequency drives and CNC machine interface LCD touch screen data input, enhanced support for cutting precision control, the machine can be operated directly on the touch screen and reflect the operational status of each part; coaxially job can be set 10 kinds of cutting width and cutting the number of one-time non-stop work done;
Focus on the basic operation of the control panel double: 1LCD Touch Screen 2 Mobile panel manual operation, the user can operate from different locations of the machine, convenient and quick;
A ball screw and servo motor drive to locate cutting width, and high-precision linear guide bearing knife, cut smooth, high accuracy;
Cutting round knife shaft speed and the speed can be adjusted, and both have a reversing function, can adapt to different cutting requirements;
Circular knife spindle and motor with 2HP - 1: 15 Powerful vacuum torque gear motor; 2HP comes while using Vector Control inverter for speed; ensures round round knife to increase the output torque of the motor at low speed work, not will lead to the inverter over-current shutdown, stability control speed.
Means having circular knife cooling system, while cutting blade automatic spray liquid cooling, the material will not burn.
Automatic corner cutter angle, cutting large size is no need to replace a single oblique trimming tool. When cutting high-precision tape select the appropriate angle is more conducive to improve cutting accuracy. And a corresponding increase in yield.
Tailstock is equipped with under-pressure protection device, when the pressure falls below a safe value, the machine will not start or automatic shutdown, safe and reliable.
The whole machine has a fault and automatic alarm malfunction by the man-machine interface display fault cause of the alarm. To facilitate the operator timely troubleshooting.
Can increase machine safety guard according to customer needs, to effectively protect the personal safety of the operator, can be adapted to clean room environments.
Techinical parameters:
Model | J-A300I | JY-A300II |
Standard discharge width | 1400mm(Customized 1600mm) | 1400mm(Customized 1600mm) |
Max Feeding Discharge | 300mm | 300mm |
Cutting width | 0.5mm-1350mm | 0.5mm-1350mm |
Slitting and Rewinding Speed | ±0.03mm--±0.08mm | ±0.025mm--±0.08mm |
Cutting targeting | Servo Shift | Servo Shift |
Hydraulic infeed infeed | Hydraulic feed | Servo feed |
Automatic turn angle function | Yes | Yes |
Automatic sharpening function | No | No |
Machine Safety | No | No |
Cutting axis specification uniaxial | φ3”Uniaxial | φ3”Uniaxial |
Configuration Tool | (Front steel circular knife)φ250mm” | Single-handedly(Front steel circular knife)φ250mm” |
Mechanical speed | 0-1400 turn/s | 0-1400 turn/s |
Voltage | 380V 50Hz(Phase four-wire) | 380V 50Hz(Phase four-wire) |
Max.total power | 8KW | 8KW |
Overall Dimension | 2900*1250*1400 | 2900*1250*1400 |
Remark | Each model can be increased according to customer special requirements for discharge width and discharge diameter; cutting different diameters can be made as needed in small, can choose gas rose axis; can be designed with a protective cover in the form; | |
Air source | The user must provide an external source (pressure of not less than 7 kg / cm²) |
Hot melt adhesive spray laminating machine
Automobile floor leather glue coating production line
Butyl rubber tape extruding coating machine
Multi function medical tape coating machine
Hot Melt Adhesive Film Extruding Coating Machine
Wax Coating Machine For Food Packaging Material